https://technoadhesives.com technoadhesives.com Fri, 10 Mar 2023 14:07:47 +0000 en-US hourly 1 https://technoadhesives.com/product/techno-adhesive-no-133-l-insulation-adhesive-nonflammable/ https://technoadhesives.com/product/techno-adhesive-no-133-l-insulation-adhesive-nonflammable/#respond Wed, 06 Jul 2022 08:50:19 +0000 https://technoadhesives.com/?post_type=product&p=983 BASE: Modified Acrylic Emulsion VISCOSITY: Brookfield #4 @ 20 rpm = 500 – 200 cps SPECIFIC GRAVITY: Lbs./Gal. 9.0 ± .1 SOLIDS: 51± 1% SOLVENT: None EQUIPMENT: Spray; Fluid Nozzle, Binks 66SS or Equal @ 20-30 psi Atomization Cap; Binks 66SFF or Equal @ 40-60 psi COVERAGE: 600 – 750 Sq.Ft./Gal. TEMPERATURE RANGE: -30˚F to 300˚F WATER/MOISTURE RESISTANCE: Excellent CLEAN UP: While still wet (white) water; After set up (clear) solvents; 1,1,1 trichlorethane, methylene chloride or toluene. CAUTION: Surfaces should be clean, dry, and free from oil or grease. Use with adequate ventilation All statements, technical information and recommendations contained herein are based on tests we believe to be reliable, but the accuracy thereof is not guaranteed, it being specifically understood that there are no warranties either expressed or implies incident to the sale of this product. No person is authorized or empowered to make any statement or recommendation concerning said product not contained herein, and any such statement or recommendation so made shall not bind the company. Users assume all risk and liability whatsoever resulting from the use of this product and must confirm the adaptability thereof by their own tests. ]]> https://technoadhesives.com/product/techno-adhesive-no-133-l-insulation-adhesive-nonflammable/feed/ 0 https://technoadhesives.com/product/techno-adhesive-no-133-insulation-adhesive-nonflammable/ https://technoadhesives.com/product/techno-adhesive-no-133-insulation-adhesive-nonflammable/#respond Tue, 05 Jul 2022 20:20:30 +0000 https://technoadhesives.com/?post_type=product&p=982 BASE: Modified Acrylic Emulsion VISCOSITY: Brookfield #4 @ 20 rpm = 1500 – 500 cps SPECIFIC GRAVITY: Lbs./Gal. 9.0 ± .1 SOLIDS: 54 ± 1% SOLVENT: None EQUIPMENT: Spray; Fluid Nozzle, Binks 66SS or Equal @ 20-30 psi Atomization Cap; Binks 66SFF or Equal @ 40-60 psi FIRE RESISTANCE: This adhesive is completely noncombustible in the wet state, and the dried adhesive has been approved under ASTM E84-67 as required by NBFU 90A, UL 723, NFPA 255 and UBC 42-1. It is also approved under NFPA 90A, and complies with ASTM C916 as a Type 1 adhesive. This is the surface burning characteristics of building materials; the results are as follows: Flame Spread 10 Fuel Contributed 5 Tested at 450 sq f t/Gal. Smoke Developed 0 This adhesive may be applied with economical low pressure low C.F.M. equipment using Binks 66SA fluid nozzle or equal an 66SA air cap, at fluid pressure of 15-20 psi, and atomization of 25-30 psi. COVERAGE: 600 – 750 Sq.Ft./Gal. TEMPERATURE RANGE: -30˚F to 300˚F WATER/MOISTURE RESISTANCE: Excellent CLEAN UP: While still wet (white) water; After set up (clear) solvents; 1,1,1 trichlorethane, methylene chloride or toluene. CAUTION: Surfaces should be clean, dry, and free from oil or grease. Use with adequate ventilation. All statements, technical information and recommendations contained herein are based on tests we believe to be reliable, but the accuracy thereof is not guaranteed, it being specifically understood that there are no warranties either expressed or implies incident to the sale of this product. No person is authorized or empowered to make any statement or recommendation concerning said product not contained herein, and any such statement or recommendation so made shall not bind the company. Users assume all risk and liability whatsoever resulting from the use of this product and must confirm the adaptability thereof by their own tests. ]]> https://technoadhesives.com/product/techno-adhesive-no-133-insulation-adhesive-nonflammable/feed/ 0 https://technoadhesives.com/product/techno-adhesive-no-106-nonflam/ https://technoadhesives.com/product/techno-adhesive-no-106-nonflam/#respond Tue, 05 Jul 2022 18:03:59 +0000 https://technoadhesives.com/?post_type=product&p=981 BASE: Resin Modified Rubber VISCOSITY: Medium Thin Liquid (Brookfield 4/20 2000 – 3000 cps.) SPECIFIC GRAVITY: 10.5 ± .2 Lbs./Gal. SOLVENT: Blend of Chlorinated Solvents – Contains No O.D.C.’s SOLIDS: % by Weight 18% ± 2%, by Volume 22% COLOR: Green FIRE RESISTANCE: This adhesive is completely noncombustible in the wet state, and the dried adhesive has been approved under ASTM E84-67 as required by NBFU 90A, UL 723, NFPA 255 and UBC 42-1. It is also approved under NFPA 90A, and complies with ASTM C916 as a Type 1 adhesive. This is the surface burning characteristics of building materials; the results are as follows: Flame Spread 10 Fuel Contributed 5 Tested at 450 sq f t/Gal. Smoke Developed 0 This adhesive may be applied with economical low pressure low C.F.M. equipment using Binks 66SA fluid nozzle or equal an 66SA air cap, at fluid pressure of 15-20 psi, and atomization of 25-30 psi. COVERAGE: 450-600 Sq.Ft./Gal. U to 600 Sq.Ft./Gal. When Sprayed, Less with Brush or Roller TEMPERATURE RANGE: -30˚F to 200˚F WATER & MOISTURE RESISTANCE: Excellent All statements, technical information and recommendations contained herein are based on tests we believe to be reliable, but the accuracy thereof is not guaranteed, it being specifically understood that there are no warranties either expressed or implies incident to the sale of this product. No person is authorized or empowered to make any statement or recommendation concerning said product not contained herein, and any such statement or recommendation so made shall not bind the company. Users assume all risk and liability whatsoever resulting from the use of this product and must confirm the adaptability thereof by their own tests.

 

]]> https://technoadhesives.com/product/techno-adhesive-no-106-nonflam/feed/ 0 https://technoadhesives.com/product/techno-adhesive-no-106-easy-spray-insulation-adhesive/ https://technoadhesives.com/product/techno-adhesive-no-106-easy-spray-insulation-adhesive/#respond Tue, 05 Jul 2022 17:25:10 +0000 https://technoadhesives.com/?post_type=product&p=970 BASE: Resin Modified Rubber VISCOSITY: Medium Thin Liquid (Brookfield 1000 – 3000 cps.) SPECIFIC GRAVITY: 6.5 ± .2 Lbs./Gal. SOLVENT: Aliphatic Hydrocarbon SOLIDS: % by Weight 30% ± 2% COLOR: Clear, Green, Black or Red FIRE RESISTANCE: This adhesive has been approved under ASTM E84-67 as
required by UL 465, UL 727, UL 723, MBFU 90A, NFPA 255,
and UBC 42-1. BONDING TIME: 15 seconds to 30 minutes single surface application, For greatly
increased open times, apply to both surfaces and use as a
contact bond cement. (recommended for expanded poly styrene) COVERAGE: Up to 600 Sq.Ft./Gal. When Sprayed, Less with Brush or Roller All statements, technical information and recommendations contained herein are based on tests we believe to be reliable, but the accuracy thereof is not guaranteed, it being specifically understood that there are no warranties either expressed or implies incident to the sale of this product. No person is authorized or empowered to make any statement or recommendation concerning said product not contained herein, and any such statement or recommendation so made shall not bind the company. Users assume all risk and liability whatsoever resulting from the use of this product and must confirm the adaptability thereof by their own tests. ]]> https://technoadhesives.com/product/techno-adhesive-no-106-easy-spray-insulation-adhesive/feed/ 0