Panel & Laminate Construction – technoadhesives.com https://technoadhesives.com technoadhesives.com Fri, 10 Mar 2023 07:33:32 +0000 en-US hourly 1 TECHNO ADHESIVE NO. 199 NON FLAMMABLE CONTACT CEMENT https://technoadhesives.com/product/techno-adhesive-no-199-non-flammable-contact-cement/ https://technoadhesives.com/product/techno-adhesive-no-199-non-flammable-contact-cement/#respond Wed, 06 Jul 2022 09:34:39 +0000 https://technoadhesives.com/?post_type=product&p=988 BASE: Resin Modified Rubber SOLVENT: Chlorinated Hydrocarbon COLOR: Clear, Red, Green, Black CONSISTANCY: Medium Thin Liquid, Brookfield 1/20 250 CPS + -50 CPS @ 70˚F SOLIDS: % by Weight 21% ± 2% SPECIFIC GRAVITY: 10.3 ± .2 Lbs./Gallon APPLICATION: Most methods may be used, but due to the fast drying spray application is recommended. Binks 63 fluid tip, 66SA air cap, 30-40 psi fluid, 40-50 psi atomization. CAUTION: Avoid prolonged contact with skin or breathing of vapors,

Provide adequate ventilation. All statements, technical information and recommendations contained herein are based on tests we believe to be reliable, but the accuracy thereof is not guaranteed, it being specifically understood that there are no warranties either expressed or implies incident to the sale of this product. No person is authorized or empowered to make any statement or recommendation concerning said product not contained herein, and any such statement or recommendation so made shall not bind the company. Users assume all risk and liability whatsoever resulting from the use of this product and must confirm the adaptability thereof by their own tests. ]]> https://technoadhesives.com/product/techno-adhesive-no-199-non-flammable-contact-cement/feed/ 0 TECHNO ADHESIVE #122 ASSEMBLY WOOD GLUE https://technoadhesives.com/product/techno-adhesive-122-assembly-wood-glue/ https://technoadhesives.com/product/techno-adhesive-122-assembly-wood-glue/#respond Wed, 06 Jul 2022 09:27:57 +0000 https://technoadhesives.com/?post_type=product&p=987 TYPE: Polyvinyl Acetate Emulsion VISCOSITY: 6000 CPS + or – 500 Cps. SOLIDS: 46 + or – 1 pH: 4.5 – 5 POUNDS PER GALLON: 9.4 APPLICATION: Approximately 45 pounds of glue per 1000 feet of single glue line. This may vary, depending on the porosity of the substrates. Use enough glue to produce a light squeeze out along the glue perimeter. Open assembly periods should not exceed 12 minutes at 70 degrees Farenheit. Laminates should be stored a minimum of 4 hours before cutting or sanding, with an optimum time of 24 hours. All statements, technical information and recommendations contained herein are based on tests we believe to be reliable, but the accuracy thereof is not guaranteed, it being specifically understood that there are no warranties either expressed or implies incident to the sale of this product. No person is authorized or empowered to make any statement or recommendation concerning said product not contained herein, and any such statement or recommendation so made shall not bind the company. Users assume all risk and liability whatsoever resulting from the use of this product and must confirm the adaptability thereof by their own tests. ]]> https://technoadhesives.com/product/techno-adhesive-122-assembly-wood-glue/feed/ 0